anthonychlee and mska:
Regardless of vendor, the first step is to configure your syslog device to send syslog to the LEM. If you haven't done that, scanning for new nodes won't ever find anything. You'll need to work with the vendor of your device to find out how to configure syslog.
Once you've got syslog configured, you should be able to confirm the LEM is receiving data by connecting the CMC shell, going to "APPLIANCE" and running a "CHECKLOGS" command.
Details on how to connect to the CMC shell can be found here: SolarWinds Knowledge Base :: Use an SSH client to connect to your LEM appliance
If the LEM is getting data (you can find your device's IP and logs in one of the local facilities) you can always use your maintenance to contact support and request a new connector be made.
In the meantime, you can do what cscoengineer suggested: use the LEM to collect raw logs and search them. This requires some configuration, though. First, you'll need to configure the LEM to store raw logs:
Then you'll need to configure any syslog connector (I suggest the Cisco FIrewalls connector). Set it to read the log that you identified with the CHECKLOGS command, and change the "Output" drop down to "nDepth." This will make the logs searchable even if the LEM isn't normalizing them.